The normal modes of a standing wave are all just multiples of the fundamental frequency.


WATCH THE VIDEO


Teachable Topics
  • Standing Waves and Nodes
  • Harmonics
  • Frequency

Theory:

Two sine waves travelling along the x-axis in opposite directions add together due to superposition. The resultant displacement (D) in the y-axis is given by the equation:

 D (x, t) = 2a sin(kx) cos(ωt)

where a is the amplitude, ω is the angular frequency, t is time, and k is the wave number given by 2π /λ, where λ is the wavelength. This interference will cause a standing wave to form on a string of length L tied at both ends if two boundary conditions are met. For this string, the displacement at each end must be 0. Mathematically:

 D (x = 0, t) = 0          and           D (x = L, t) = 0

The first boundary condition, x = 0, is already met as sin(0) = 0. The other boundary condition, x= L, will be met if:

 2a sin(kL) = 0

This means that sin(kL) must be equal to zero. This is the case if kL is equal to an integer multiple of π:

 kL = (2πL) / λ = nπ,      n = 1, 2, 3, 4...

Because the string is a fixed length, the only thing that can be varied in the wavelength, λ. Thus, a standing wave can only be form if the wavelength is:

 λn = (2πL) / (nπ) = 2L / n

These possible standing waves are called the normal modes of the vibrating string.

For waves like this, the wavelength is related to the frequency by the equation:

f = v / λ 

where v is the speed of the wave. Using this, the corresponding frequencies of the normal modes can be found:

 fn = v / λn = v / (2L / n) = nv / 2L

The frequency of the first normal mode (n = 1) is:

 f1 = v / 2L

This frequency is also known as the fundamental frequency. The frequencies of all subsequent modes can be expressed in term of this frequency:

 fn = nf1,     n = 1, 2, 3, 4...

These higher frequency modes are also known as harmonics. 


Apparatus:

  • Sine wave generator
  • Mechanical wave driver
  • String, with something so weigh down the dangling end
  • Pulley

Procedure

  1. Set up the apparatus like in the video. 
  2. Turn on the sine wave generator and find the first standing wave (n = 1) along the string. Remember the frequency of this mode.
  3. Find the following modes of the wave. Their frequencies should be integer multiples of the first mode's frequency.

Search 'em up!